[danner]

Just upgraded to v3.2_b001. Everything appears normal except on the system info screen, it says "check for latest software is disabled".

[danner]

The internal web page System Info screen says,

"WEATHERDUINO PRO2 PLUS ™ - 2PLUS_v3.2_b001
Latest available version: 2PLUS_v3.2_b001"

but on the receiver system info page it still says "check for latest software is disabled"

other than that everything else appears to be working fine.

[uncle_bob]

Is it enabled in the config?

[danner]

Is it enabled in the config?

I don't know since I never enabled or disabled it on this or previous versions.

I did a search for "version" and found this in the "NET" tab, but nothing in the config tab

//---------------------------------------------------------
//     Software Version Checker
//---------------------------------------------------------
#if (Enable_Internet == 1)
void check_SoftwareVersion()
{
  static uint8_t mux_id = 4;
  String DevModel = String(Board_Version / 10.0, 1) + "-" + DeviceModel;
  char HTTP_response[250];
  memset(HTTP_response, 0, sizeof(HTTP_response));

String Data = "GET /WD_services/VCheck/LastVersionCheck.php?";
  Data += "ID=";
  Data += DevID;
  Data += "&model=";
  Data += DevModel;
  Data += "&softver=";
  Data += SoftwareVer;
  Data += "&lt=";
  Data += String(LATITUDE, 3);
  Data += "&lg=";
  Data += String(LONGITUDE, 3);
  Data += " HTTP/1.0\r\n";
  Data += "Host: ";
  Data += "weatherduino.com";
  Data += "\r\n";
  Data += "Connection: close\r\n\r\n";

// Create connection with the WeatherDuino Server
  if (wifi.createTCP(mux_id, "weatherduino.com", 80, 0))
  {
    #ifdef PRINT_DEBUG_VCHECK
      Serial.println(F("Checking for latest software version..."));
    #endif
    const char *PacketToSend = Data.c_str();
    wifi.send(mux_id,(const uint8_t*)PacketToSend, strlen(PacketToSend));

    uint8_t buffer[250] = {0};
    uint16_t len = wifi.recv(mux_id, buffer, sizeof(buffer), 2000);
    if (len > 0)
     {
      for(uint16_t i = 0; i < len; i++)
       {
        HTTP_response[i] = (char)buffer[i];
       }
      char * content = strstr(HTTP_response, "\r\n\r\n");      
      if (content != NULL)
       {
        content += 4;
        LatestSoftwareVersion = content;
        //VCheck = true;
        #ifdef PRINT_DEBUG_VCHECK
          Serial.print(F("Latest software version: ")); Serial.println(LatestSoftwareVersion);
        #endif
       }
     }
  }
  wifi.releaseTCP(mux_id);
}

#endif
//=========================================================================================

[hornychz]

Is it enabled in the config?

I don't know since I never enabled or disabled it on this or previous versions.

It's a new feature, I have to enable it ...

[danner]

It's a new feature, I have to enable it ...

Yes and no. Ver3.1 had it and I didn't have to enable it. I didn't see where to enable it on Ver3.2.

I just looked at the config again and cannot see where to enable or disable it. Care to tell me where it is?

[uncle_bob]

I saw it in there earlier. Let me download it and take a looksee.

[uncle_bob]

I can only find what you already posted, sorry.
Might have to wait for the boss or Horny have some say.

[uncle_bob]

In the meantime maybe uncomment this part //#define PRINT_DEBUG_VCHECK
and check the serial monitor (at 19200 baud) and see if that may help troubleshoot?

[hornychz]

Hi,

I found only the same as you:

Code:

//---------------------------------------------------------
//     Software Version Checker
//---------------------------------------------------------
#if (Enable_Internet == 1)
void check_SoftwareVersion()
{ ....

I think it means you have to only enable internet and nothing more ...

(Now I am at my customer, I can not do more. Maybe Werk_AG will answer,
or in my evening I can see it again.)